V-TAI / VT-CE-CM2
VT-CE-CM2 specifications & installation
One dedicated model. The connections and dimensions you need to plan its place in your bakery.
04 / THE DETAILS THAT MATTER
Small footprint. Serious capability.
One dedicated model. The connections and dimensions you need to plan its place in your bakery.
Download product sheetPDF · Chinese · 2 pages
1200 × 740 × 1215 mm| Model | VT-CE-CM2 |
| Dimensions (L × W × H) | 1200 × 740 × 1215 mm |
| Mold diameter / right station | 6″–10″ |
| Mold diameter / left station | 8″–14″ |
| Rated throughput | 300–400 molds per hour |
| Quick cycle | ≈15 s |
| Total electrical load | 0.5 kW |
| Motors | 0.2 kW × 2 |
| Power supply | 380 V / 50–60 Hz / 3PH |
| Water inlet / drain | 3/4″ / Ø38 mm |
| Construction | SUS304 |
| Water heating | Cold water · no heating |
Quick cycle: approximately 15 seconds for two molds, excluding handling. Confirm 50/60 Hz configuration before ordering. The supplied manual references compressed air; our team will confirm the requirement for the delivered machine.
The short answer
What does installation need?
380 V three-phase power, a 3/4 inch water inlet, Ø38 mm drain and a level, non-slip floor. Confirm frequency and compressed-air requirements with V-TAI. A qualified professional must make electrical connections.
Based on V-TAI product information and the supplied product sheet. Final configuration and sample suitability should be confirmed with V-TAI.
V-TAI · VT-CE-CM2 Download product sheet · PDF · Chinese · 2 pages